Configuring Wacom Bamboo Pen and Touch(CTH-460) in Debian squeeze

Recently bought a Wacom bamboo pen and touch after searching many places. Here in Kolkata It was not available in the shop of Ganesh Avenue and Chandni Chowk. Most of them have never heard the name Wacom. In Supreme Computers only bamboo pen model was available. I was searching for pen and touch model because this 1024 levels of pressure sensitivity while the pen model has only half of it. Finally I got it in imagine store at salt lake city center.

I after i bought it I thought of giving it a try in my Debian squeeze. I searched for guides in the net but none of them was sufficient for squeeze. After trying for 2 days I got it working.

First of all the current kernel of squeeze (2.6.32-5) does not have driver of this model. So the kernel module need to compiled and xserver-xorg-input-wacom (0.10.5) does not support this as said here . So that is also need to be compiled.

As said in linuxwacom wiki for kernels between 2.6.26 - 2.6.36 you need to download the input-wacom driver. I downloaded input-wacom-0.11.1.tar.bz2 which is the latest one as of now.

Before compiling we need to install the build tools. So, do

$sudo aptitude install build-essential xorg-dev autoconf libtool

Get kernel version using

$uname -a

Then install,

$sudo aptitude install linux-headers-

Do,

$tar xjvf input-wacom-0.11.1.tar.bz2
$cd input-wacom-0.11.1

To compile

$./autogen.sh --prefix=/usr --libdir=/usr/lib  # for 32bit installations

or

$./autogen.sh --prefix=/usr --libdir=/usr/lib64  # for 64bit installations

This will generate wacom.ko. Now copy it to the default kernel modules location. Before that the previous wacom.ko at
/lib/modules/`uname -r`/kernel/drivers/input/tablet/wacom.ko can be backed-up.

$sudo cp ./2.6.30/wacom.ko /lib/modules/`uname -r`/kernel/drivers/input/tablet/wacom.ko
$sudo depmod -a

Now if the tablet is connected it gets attached to some /dev/input/eventX , one for pen and another one for touch. This can be seen using,

$dmesg|tail

But to use it in applications xorg driver also must be installed.
For this I downloaded xf86-input-wacom-0.11.1.tar.bz2. The latest one can be downloaded from here.
Before compiling this we need to install xutils-dev which provides xorg-macros.

$sudo aptitude install xutils-dev.

Now to compile the wacom input driver for X.
First,

$tar -xvf xf86-input-wacom-0.11.1.tar.bz2
$cd xf86-input-wacom-0.11.1

Then

$./configure --prefix=/usr --libdir=/usr/lib # for 32bit $installations

or

$./configure --prefix=/usr --libdir=/usr/lib64 # for 64bit installations

After that

$make
$make install

After installing the driver, restart X (by logging out and then logging in or by restarting the computer).

Now we need to configure X before we can actually use it.
First rename existing wacom configuration /usr/share/X11/xorg.conf.d/20-wacom.conf. The file 50-wacom.conf in xorg.conf.d is copied by xf86-input-wacom, that should be kept intact. If there are any files of wacom in /etc/udev/rules.d/ rename them.

Now create a new file 52-wacom-options.conf in /usr/share/X11/xorg.conf.d/
with the following content:

Section "InputClass"
 Identifier "Wacom Bamboo Presscurve and Area configurations"
 MatchProduct "Wacom BambooFun 2FG 4x5 Pen"
 MatchDevicePath "/dev/input/event*"

# Apply a custom configuration options. Any option will # also apply to all dependent devices, if applicable. So # e.g. the pressure curve will be available on the      # stylus and the eraser (but not on the pad).

 Option "PressCurve" "0 10 90 100"
 Option "TopX" "0"
 Option "TopY" "0"
 Option "BottomX" "14720"
 Option "BottomY" "9200"
EndSection

Section "InputClass"
 Identifier "Wacom Bamboo Finger Area configuration"
 MatchProduct "Wacom BambooFun 2FG 4x5 Finger"
 MatchDevicePath "/dev/input/event*"

 # Apply custom Options to this device below.
 Option "TopX" "0"
 Option "TopY" "0"
 Option "BottomX" "480"
 Option "BottomY" "320"
EndSection

This is just copied form linuxwacom wiki custom options may be changed. See man wacom for details.
Now the bambooPT will work.
Here is picture drawn using it on GIMP by Gopal.

Enable root login in GDM3

Recently, Debian has Released their next stable version (version 6) codename squeeze.
So, I updated my computer from lenny to squeeze. This has updated GDM to GDM3 the next generation
gnome display manager (as they say it).
But after that I'm missing the old GDM. Its themes, the old gdmsetup tool, and event the option to allow
login of local administrator. I had tried changing /etc/gdm3/daemaon.conf by adding a line AllowRoot=true
in the [Security] section.But without any help.

Today, i was checking the files given in the man of gdm3.
There is a file /etc/pam.d/gdm3
In it there is line that contains "user != root quiet_success"
Removing the "user != root" from that did the trick and I was able to login as root user in GDM3.

Update 28 Jul

Again failing to post topics and my assignments I said previously to post.
These days I am particularly busy with an assignment to implement a small dbms. Though a big task doing it as a part by part assignment. Hoping to post all my previous assignments, but main problem i am facing is where to upload the programs. I used ensips for my previous uploads but esnips is not working here at my univ as flash is blocked.
Any way that's for today.

GDB guide

Today I found a good short and quick introduction to gdb here.

This is a short preview of it -

Help Commands
help command	Get help on a certain command
apropos keyword	Search help for a particular keyword
Starting and Quitting
gdb [-tui] [-c core] [exename]	(Unix Command) Start gdb on an executable or standalone; specify "-tui" to start the TUI GUI; specify "-c" with a corefile name to see where a crash occurred
run [arg1] [arg2] [...]	Run the currently loaded program with the given command line arguments
quit	Exit the debugger
file exename	Load an executable file by name
Breakpoints and Watchpoints
break location	Set a breakpoint at a location, line number, or file (e.g. "main", "5", or "hello.c:23")
watch expression	Break when a variable is written to
rwatch expression	Break when a variable is read from
awatch expression	Break when a variable is written to or read from
info break	Display breakpoint and watchpoint information and numbers
info watch	Same as info break
clear location	Clear a breakpoint from a location
delete num	Delete a breakpoint or watchpoint by number
Stepping and Running
next	Run to the next line of this function
step	Step into the function on this line, if possible
stepi	Step a single assembly instruction
continue	Keep running from here
CTRL-C	Stop running, wherever you are
finish	Run until the end of the current function
advance location	Advance to a location, line number, or file (e.g. "somefunction", "5", or "hello.c:23")
jump location	Just like continue, except jump to a particular location first.
Examining and Modifying Variables
display expression	Display the value of a variable or expression every step of the program—the expression must make sense in the current scope
info display	Show a list of expressions currently being displayed and their numbers
undisplay num	Stop showing an expression identified by its number (see info display)
print expression	Print the value of a variable or expression
printf formatstr expressionlist	Do some formatted output with printf() e.g. printf "i = %d, p = %s\n", i, p
set variable expression	Set a variable to value, e.g. set variable x=20
set (expression)	Works like set variable
Window Commands
info win	Shows current window info
focus winname	Set focus to a particular window bby name ("SRC", "CMD", "ASM", or "REG") or by position ("next" or "prev")
fs	Alias for focus
layout type	Set the window layout ("src", "asm", "split", or "reg")
tui reg type	Set the register window layout ("general", "float", "system", or "next")
winheight val	Set the window height (either an absolute value, or a relative value prefaced with "+" or "-")
wh	Alias for winheight
set disassembly-flavor flavor	Set the look-and-feel of the disassembly. On Intel machines, valid flavors are intel and att
Misc Commands
RETURN	Hit RETURN to repeat the last command
backtrace	Show the current stack
bt	Alias for backtrace
attach pid	Attach to an already-running process by its PID
info registers	Dump integer registers to screen
info all-registers	Dump all registers to screen

After One Year...

Almost one year have passed since my college ended and I came to this new University.I don't know what have I really done during this time.Sometimes I feel I may have changed during this time.But things have not changed much though.

I said earlier that I would post here more frequently than ever, but something never change so easily.

By the way, I have only posted my programs from my first term. Posting programs from 4 terms is pending hoping to post that soon.

I know nobody reads this blog, but I am thinking to post things here just to practice writing.

Oh well. Thats for now...

My works of 1st term

1.Logbook ADT - create an abstract data type for logbook.[download]
2.JParse -
JParse evaluates user expression till exit command.It supports variables.
operators:
()
/,*
+,-
<,>
!=,==
||
&&
=

Op:
jparse> 10-15/5
result: 7
jparse> b=1
result=1
jparse> a=b&&0
result=0
[download]

3.Program on Scheme
a)Binary Search Tree
b)List sum using lazy evaluation
c)Set operations:equal? , union , intersection.[download]
d)Breath First Search [download]

4.Weighted graph [download]
5.HashTable in java [download]
6.Jparse with exceptions to catch errors [download]
7.Presentation on Perl
part1
part2
example of my and local variables.[download]
A program that reads csv file an output it.[download]

8.Program to simulate given dfa.[download]
9.Program of cyk algorihtm. [download]

10.8 queen problem.[download]
11.combination generating.[download]
12.Square root.[download]
13.program in prolog to get listlength.[download]

All these are tested working under debian 5.

That's it for now.

Another thing wishing everyone Happy Diwali.

Puja Vacation

After the exams the puja vacations have started.

Now a bit of free time to chill.

So I am uploaing all my assignments on net.

BTW happy puja to all.

At last

At last after a long time I have decided to post to my blog.
I was thinking about this for a long time but the problem was taking the first step.

It's been quite a while till my last post ,about seven months.Many things have changed in this duration.Many unexpected things also have happened.

Currently studying at Ramakrishna Mission Vivekananda University with M.Sc. in Computer Science.So I get very little time in doing all this.Yet I have decided to post on my blog as much as possible, though I think it would not be much but more than my previous posting frequency.

I hope I can post more.
So till my next post bye all.

Happy New Year

Hello everybody out there.
A new year have come again.
Like every year the last year also rushed away and only a few of our resolutions have been implemented in our life.
But never the less a new year means new hope new resolutions(again).
So lets hope for the best cause this year is a crucial year for me.As it will decide my future.